Views and advice in this article are that of the author and does not necessarily reflect the opinion or views of GetFPV. Preparationīefore diving into the modification, there are a few sacrifices that need to be done. Unfortunately, the DVR board will have to be removed. This means that certain features, such as HDMI, DVR, and audio, will not be available anymore. Also, a fair bit of plastic removal is necessary to fit the module, so be prepared to do some cutting. Finally, the user interface buttons used for DVR playback and frequency selection will no longer be functional, as only the video feed will be available from the receiver module. However, most receiver modules are equipped with some sort of built-in user interface, so this will not be much of a problem. There are three essential wires that make up the bulk of this project: voltage, ground, and video. These are the following tools/materials I used in this mod: These are soldered up directly to the goggle’s main board and provide power to the receiver and enable the receiver’s video output to be displayed on the goggle screens.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |